How to Scan for Over-the-Air Antenna Channels: A Step-by-Step Guide

Cord Cutting, How To Articles


Scanning for antenna channels is an essential step in setting up your TV for receiving over-the-air broadcasts. With the vast number of channels available, it can be a challenge to find and set up the right channels. This article will guide you through the process of scanning for antenna channels.


1: Check your Antenna

Before scanning for channels, it is important to ensure that your antenna is installed correctly and is in a position to receive strong signals. Check that the antenna is pointed in the right direction, away from any obstructions, and has a clear line of sight to the transmitter. You may also want to consider purchasing an amplified antenna if you are struggling to pick up a clear signal.

2: Connect your TV

Once you have checked your antenna, connect your TV to the antenna using the coaxial cable provided. Make sure that the cable is securely connected to both the TV and the antenna.

3: Access the TV Menu

Next, access your TV menu by pressing the menu button on your remote control. Look for an option called ‘Channel Scan,’ ‘Auto Tuning,’ or ‘Auto Search.’ The wording may differ depending on your TV brand.

4: Select Antenna

When you select ‘Channel Scan,’ you will be prompted to choose your source. Make sure you select ‘Antenna’ and not ‘Cable’ or ‘Satellite’ since you want to scan for over-the-air channels.

5: Start Scanning

Once you have selected ‘Antenna,’ press the ‘Scan’ button to start scanning for channels. The TV will begin scanning through all the available frequencies to find all the channels that are available in your area. This process may take a few minutes to complete.

6: Save Channels

Once the scan is complete, your TV will display a list of all the channels that it has found. Some channels may not have clear signals, while others may not be available in your area. Carefully go through the list of channels and select the ones you want to keep by pressing the ‘Save’ or ‘Add’ button on your remote control.


Scanning for antenna channels is an important step in setting up your TV for over-the-air broadcasts. By following the above steps, you should be able to scan for channels and fine-tune them to receive high-quality broadcasts. Remember to check your antenna and ensure it is installed correctly to receive the best possible signals.

You may also like:

How to Install an Outdoor TV Antenna
How to Install an Outdoor TV Antenna

Guide to Setting Up an Exterior TV Antenna TV antennas can give access to multiple channels, often with crisp high-definition visuals. While exterior antennas demand a tad more elbow grease compared to their interior counterparts, both setups are fairly...

read more

Need Tech Support?

Contact your local Tuff Techies for amazing 5-star tech help. From computers to printers, and TVs to smart cameras, our expert techs can do it all.

Tuff techies animated storefront pic
Google Rating
Based on 386 reviews